1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.timeout.value
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.timeout.value

wlan.ip.timeout.value

This network setting refers to the number of seconds before the connection times out for the wireless print server. For this to take effect, the print server must be reset.

Setvar

To set the time value of the wireless print server:
! U1 setvar "wlan.ip.timeout.value" "value"
Values
"1"
 through
"3600"
Default
"300"

Getvar

To respond with the current setting value:
! U1 getvar "wlan.ip.timeout.value"
Example
This
setvar
example shows the value set to
"300"
. 
! U1 setvar "wlan.ip.timeout.value" "300"
When the
setvar
 value is set to
"300"
, the
getvar
 result is
"300"
.