1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.mirror.server
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.mirror.server

ip.mirror.server

This command identifies the IP address of the mirroring server.

Setvar

To set the IP address of the mirroring server:
! U1 setvar "ip.mirror.server" "value"
Values
A valid IP address
Default
"127.0.0.1"

Getvar

To retrieve the IP address of the mirroring server:
! U1 getvar "ip.mirror.server"
Example
This
setvar
 example shows the value set to
"10.3.1.1"
.
! U1 setvar "ip.mirror.server" "10.3.1.1"
When the
setvar
 value is set to
"10.3.1.1"
, the
getvar
 result is
"10.3.1.1"
.