1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.timeout.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.timeout.enable

wlan.ip.timeout.enable

Use this command to enable the connection timeout on the wireless print server. For this to take effect, the print server must be reset.

Setvar

To enable or disable the timeout checking on the wireless print server:
! U1 setvar "wlan.ip.timeout.enable" "value"
Values
"off"
 turns off the connection checking
"on"
 turns on the connection checking
Default
"on"

Getvar

To return whether the timeout checking is enabled on the wireless print server:
! U1 getvar "wlan.ip.timeout.enable"
Example
This
setvar
 example shows the value set to
"on"
. 
! U1 setvar "wlan.ip.timeout.enable" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.