1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. power.battery_led_blink_rate 
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
power.battery_led_blink_rate 

power.battery_led_blink_rate 

Sets the Extended Smart Battery LED blink rate. The rate is set in multiples of 0.5 seconds.

Setvar

To set the Extended Smart Battery LED blink rate:
! U1 setvar "power.battery_led_blink_rate" "value"
Values
A number from
"0"
 to
"127"
. The rate is set in multiples of 0.5 seconds.
Default
"2"

Getvar

To return the current setting value:
! U1 getvar "power.battery_led_blink_rate"
Example
The rate is set in multiples of 0.5 seconds. To achieve an On time of 1 second and an Off time of 4.5 seconds, one would use the following configuration:
On Duration = 2 (2 * 0.5 = 1 second), see power.battery_led_on_duration
Off Duration = 9 (9 * 0.5 = 4.5 seconds), see power.battery_led_off_duration 
Blink Rate = 2 (2 * 0.5 = 1 second)