1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. bluetooth.friendly_name
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
bluetooth.friendly_name

bluetooth.friendly_name

This command sets the friendly name, which is used during service discovery. For changes to take effect, you must power cycle the printer or issue the
device.reset
 command. If
bluetooth.friendly_name
 is not set by you, it will default to the printer serial number.

Setvar

To set the Bluetooth discoverable mode:
! U1 setvar "bluetooth.friendly_name" "value"
Values
Any text string up to 17 characters

Getvar

To retrieve the current Bluetooth discoverable mode:
! U1 getvar "bluetooth.friendly_name"
Example
This
setvar
example shows the value set to
"1234567"
. 
! U1 setvar "bluetooth.friendly_name" "1234567"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"1234567"
.