1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. ezpl.power_up_action
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ezpl.power_up_action

ezpl.power_up_action

This command sets what happens to the media when the printer is powered on. This command is similar to the
^MF
 ZPL command.

Setvar

To set the media motion and calibration setting at printer power up:
! U1 setvar "ezpl.power_up_action" "value"
Values
  • "calibrate"
  • "feed"
  • "length"
  • "no motion"
  • "short cal"
Default
"calibrate"

Getvar

To return the current power up media motion and calibration settings:
! U1 getvar "ezpl.power_up_action"
Example
This
setvar
 example sets the power up calibration setting to
"length"
. 
! U1 setvar "ezpl.power_up_action" "length"