1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.timeout.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.timeout.enable

external_wired.ip.timeout.enable

This network setting refers to enabling the connection timeout on the external wired 10/100 print server. For this to take effect, the print server must be reset.

Setvar

To instruct the printer to enable or disable the timeout checking on the external wired print server:
! U1 setvar "external_wired.ip.timeout.enable" "value"
Values
  • "off"
     turns off the connection checking
  • "on"
     turns on the connection checking
Default
"on"

Getvar

To instruct the printer to return whether the timeout checking is enabled on the external wired print server:
! U1 getvar "external_wired.ip.timeout.enable"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows the value set to
"on"
. 
! U1 setvar "external_wired.ip.timeout.enable" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.