1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.essid
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.essid

wlan.essid

This printer setting refers to the printer’s stored ESSID.

Setvar

To instruct the printer to change the ESSID:
! U1 setvar "wlan.essid" "value"
Values
32 character alphanumeric string
Default
"125"
 (Printers running Link-OS v5.3 or earlier versions)
""
 (For Printers running Link-OS 6 or later versions)

Getvar

To instruct the printer to respond with the stored ESSID value:
! U1 getvar "wlan.essid"
Example
This
setvar
 example shows the value set to
"125"
.
! U1 setvar "wlan.essid" "125"
When the
setvar
 value is set to
"125"
, the
getvar
 result is
"125"
.
For Link-OS Firmware earlier than 6.0, setting ESSID to "" allows the printer to attempt to connect to an AP with any ESSID. For Link-OS Firmware of 6.0 or later, setting ESSID to "" means that the printer will not attempt a Wi-Fi connection.