1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. Real Time Clock
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
Real Time Clock

Real Time Clock

This appendix contains the information needed to install, program, and operate the Real Time Clock (RTC) option. This hardware option is available as either a factory-installed or field‑installable option in specific printer products manufactured and sold by Zebra Technologies Corporation.
The Real Time Clock option is currently available for following printers, and requires that the firmware version shown is installed on that printer.
Supported Zebra Printer and Print Engine Models
Requires this Firmware Version or Later
105SL printers that meet any one of the following criteria:
  • if the printer was manufactured after April 2006
  • if the RTC Date and the RTC Time fields are printed on the configuration label
  • if the RTC Date and the RTC Time appear on the LCD display
60.13.0.13Z
DA402 & T402 printers
32.8.4
LP2844-Z, TPL2844-Z, and TPL3844-Z printers
45.10.x
PAX Series print engines
170PAX2 print engines
29.9.x or 31.9.x
110PAX3 print engines using Standard Font
34.10.x
110PAX3 print engines using TT Font
49.10.x
116PAX3 print engines using TT Font
35.10.x
170PAX3 print engines using Standard Font
37.10.x
170PAX3 print engines using TT Font
38.10.x
110PAX4 and 170PAX4 print engines
60.13.0.12
S4M printers (field-installable kit)
50.13.x
S600 printers
27.10.3
Xi Series printers
90XiII, 140XiII, 170XiII & 220XiII printers
18.9.x
90XiIII, 96XiIII, 140XiIII, 170XiIII, and 220XiIII printers
33.10.0
90XiIIIPlus, 96XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, and 220XiIIIPlus printers
60.13.0.12
Z4Mplus and Z6Mplus printers
60.13.0.12
ZM400/ZM600/RZ400/RZ600 printers
53.15.xZ