1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. alerts.send_current_status_alerts
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
alerts.send_current_status_alerts

alerts.send_current_status_alerts

Generates all of the alerts specified in
alerts.configured
 for the current status conditions in the printer and sends the alerts to the specified destination. The destination can be one of the types specified from
alerts.destinations
.

Setvar

To send the current status of the printer to the specified destination:
! U1 setvar "alerts.send_current_status_alerts" "<value>"
where <value> is
[destination],[destination_address],[port].
.
  • [destination]
     can be any of the values returned from
    alerts.destination
    .
  • [destination_address]
     applies to TCP, UDP, EMAIL, SNMP, SDK, MQTT, and HTTP POST destination types.
  • [port]
     applies to TCP and UDP destination types.
Example
In this example the value of
alerts.configured
 is: 
! U1 setvar "alerts.configured" "COLD START,SNMP,Y,N,255.255.255.255,162,N,|ALL MESSAGES,MQTT,Y,Y,1,0,N,| HEAD OPEN,Y,N,255.255.255.255,162,N,"
Valid matches:
  • "MQTT,1"
     matches and would send alerts for all conditions to mqtt connection 1.
  • "SNMP,255.255.255.255,162"
     matches and would send a HEAD_OPEN alert if the head was open by SNMP to 255.255.255.255 port 162.
Invalid matches:
  • "MQTT,2"
     does not match because the MQTT connection number is different.
  • "
    SNMP,10.3.1.27,162"
     does not match because the destination address is different.