1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.option12_format
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.option12_format

ip.dhcp.option12_format

This command specifies the value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the wireless print server.

Setvar

To instruct the printer to set the value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the wireless print server:
! U1 setvar "ip.dhcp.option12_format" "value"
Values
string
Default
""

Getvar

To retrieve the value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the wireless print server:
! U1 getvar "ip.dhcp.option12_format"
Example
This
setvar
 example shows configuring the
ip.dhcp.option12
 format to the value contained in the
device.friendly_name
.
It is necessary to surround the SGD entry to be used as source for the data with the < and > characters.
! U1 setvar "ip.dhcp.option12_format" "<device.friendly_name>"
To further explain, if the above command was issued and the value currently stored in the d
evice.friendly_name
 parameter was
"ShipPrinter"
, then the response to following command would be
"ShipPrinter"
:
! U1 getvar "ip.dhcp.option12_value"