1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. zpl.delimiter
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
zpl.delimiter

zpl.delimiter

This command is used to change the delimiter character for ZPL commands. The default delimiter character is the comma (,).
Related Commands:
^CD
 and
~CD
 commands.

Setvar

To change the delimiter character for ZPL commands:
! U1 setvar "zpl.delimiter" "value"
Values
HEX values for the desired character
"00-FF,00-ff,up,down"
See ASCII for more information.
Default
"2C" (comma)

Getvar

To return the currently set delimiter character:
! U1 getvar "zpl.delimiter"
Example
This example changes the delimiter to a semi-colon (;).
! U1 setvar "zpl.delimiter" "3B"