1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. display.backlight_on_time
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
display.backlight_on_time

display.backlight_on_time

This command sets the amount of time before the backlight turns off. Valid only on printers with a display installed.

Setvar

To set the display length in seconds:
! U1 setvar "display.backlight_on_time" "time"
Values
0-8191
Default
0
If the value is set to 0, the backlight will remain on.

Getvar

To return the display length in seconds:
! U1 getvar "display.backlight_on_time"
Example
This
setvar
 example shows the value set to one minute (60 seconds).
! U1 setvar "display.backlight_on_time" "60"