1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.option12_value
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.option12_value

ip.dhcp.option12_value

This command retrieves the actual value which will be used in the discovery packet of the wireless print server.

Getvar

To retrieve the actual value which will be used in the discovery packet of the wireless print server:
! U1 getvar "ip.dhcp.option12_value"
Example
This
setvar
 example shows configuring the ip.dhcp.option12_format to the value contained in the device.friendly_name.
It is necessary to surround the SGD entry to be used as source for the data with the < and > characters.
! U1 setvar "ip.dhcp.option12_format" "<device.friendly_name>"
To further explain, if the above command was issued and the value currently stored in the device.friendly_name parameter was
"ShipPrinter"
, then the response to following command would be
"ShipPrinter"
:
! U1 getvar "ip.dhcp.option12_value"