1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. weblink.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
weblink.enable

weblink.enable

This command indicates if one or more of the weblink connections are active.
If there is more than one connection under the weblink branch (for example,
weblink.ip.conn1
) and if any of the
.location
 values are set, then this SGD will be set to
"on"
. If all connections are disabled (all connection
.location
 values set to
""
), then this value will be set to
"off"
.
^JUF, ^JUS, ^JUN, ^JUA
, and
device.restore_defaults
 do not have any affect on this setting.

Getvar

To indicate if one or more of the weblink connections are active:
! U1 getvar "weblink.enable"
Result
  • "yes"
     if any of the location values are set
  • "off"
     if all connections are disabled