1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.primary_network
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.primary_network

ip.primary_network

This command allows you to set the primary network to either wired or wireless.

Setvar

To set the primary network device:
! U1 setvar "ip.primary_network" "value"
Values
"1"
 means wired
"2"
 means wireless
Default
"1"

Getvar

To respond with the name of the current primary network device:
! U1 getvar "ip.primary_network"
Example
This
setvar
example shows the value set to
"1"
. 
! U1 setvar "ip.primary_network" "1"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"1"
.