1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. Error Detection Protocol
  3. Response From the Zebra Printer
  4. Error Conditions and System Faults
  5. Time-Out Error Conditions and Responses
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
Time-Out Error Conditions and Responses

Time-Out Error Conditions and Responses

There are certain conditions at the Zebra printer that might cause the Host computer to time-out while processing a Transaction. The following list illustrates these conditions and how the Host computer should respond to them.
Error
Response
A Request Packet from the Host computer is not received by the Zebra printer.
The Host computer times out and resends the Request Packet of the same Transaction with the same Sequence Number.
A Request Packet from the Host computer is partially received by the Zebra printer.
The Host computer times out and resends the Request Packet of the same Transaction with the same Sequence Number.
A Response Packet from the Zebra printer is not received by the Host computer.
The Host computer times out and resends the Request Packet of the same Transaction with the same Sequence Number.
A Response Packet from the Zebra printer is partially received by the Host computer.
The Host computer times out and resends the Request Packet of the same Transaction with the same Sequence Number.