1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. zbi.control.line_number
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
zbi.control.line_number

zbi.control.line_number

This command gives you control and information about which line of a stopped ZBI 2.0 program is being executed.

Setvar

To sets which line of the current ZBI 2.0 program should be executed:
! U1 setvar "zbi.control.line_number" "value"
Values
Any line number of the currently stopped ZBI program.
Default
"0"

Getvar

To return the line number that is currently being executed in the ZBI 2.0 program:
! U1 getvar "zbi.control.line_number"
Example
This
setvar
 example shows the value parameter set to
"30"
. 
! U1 setvar "zbi.control.line_number" "30"
When the
setvar
 value is set to
"30"
, the
getvar
 result is
"30"
.