1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. power.power_on_mode
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
power.power_on_mode

power.power_on_mode

Indicates if the printer will power on automatically when power is applied, i.e., when the power supply is plugged in.

Getvar

To return the current setting value:
! U1 getvar "power.power_on_mode"
Values
  • "auto"
     means the jumper is present on option card, which makes the printer power on automatically when power is applied.
  • "manual"
     means jumper is not present on option card or the option card doesn't support auto-power on, so the printer will power on only when the user presses the power button.
  • "not available"
     means this is not an option on the printer.
Default
"on"