1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.wep.auth_type
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.wep.auth_type

wlan.wep.auth_type

For the WEP security type, this printer setting selects the authentication type to be used between the printer and the access point. The authentication types are open system and shared key.
This command is not supported for printers running Link-OS 6 or later versions.

Setvar

To set the WEP authentication type:
! U1 setvar "wlan.wep.auth_type" "value"
Values
"open"
 enables the open authentication type
"shared"
 enables the shared authentication type

Getvar

To retrieve the current WEP authentication type:
! U1 getvar "wlan.wep.auth_type"
Example
This
setvar
 example shows the value set to
"open"
. 
! U1 setvar "wlan.wep.auth_type" "open"
When the
setvar
 value is set to
"open"
, the
getvar
 result is
"open"
.