1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. power.wake.radio
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
power.wake.radio

power.wake.radio

This command is used to enable or disable the power wake feature on printers that are radio (WLAN, BT Classic, and BTLE) enabled. The radio must be enabled to support waking on that interface. i.e. wlan.enable must be set to
"yes"
 to support the wake feature on WLAN.

Setvar

To enable or disable the power wake setting:
! U1 setvar "power.wake.radio" "values"
Values
"on"
"off"
ZQ6
"on"
"off"
ZQ3
"on"
ZQ3 with BT Classic/BTLE radio installed (BT Only - UART)
"off"
ZQ5 with WLAN/BT Classic radio installed
"on"
ZQ5 with BT Classic/BTLE radio installed (BT Only - UART)
"on"
"off"
ZD4xx, ZD6xx with WLAN/BT Classic/BTLE installed
"off"
ZD4xx, ZD6xx with BTLE only radio or no radio installed
Default
"on"

Getvar

To return the current setting:
! U1 getvar "power.wake.radio"