1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.gateway
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.gateway

wlan.ip.gateway

This command instructs the printer to change the wireless print server’s gateway address.
This setting refers to the gateway address. A set value is ignored if the IP protocol is not set to permanent.

Setvar

To change the wireless printer server’s gateway address:
! U1 setvar "wlan.ip.gateway" "value"
Values
Any valid gateway address
Default
"0.0.0.0"

Getvar

To respond with the wireless printer server’s gateway address:
! U1 getvar "wlan.ip.gateway"
Example
This
setvar
example shows the value set to
"10.3.5.1"
. 
! U1 setvar "wlan.ip.gateway" "10.3.5.1"
When the
setvar
 value is set to
"10.3.5.1"
, the
getvar
 result is
"10.3.5.1"
.