Sets the offset of the black mark or label gap to the point of separation between documents.
Related ZPL Command
^MN
Setvar
To set the black mark offset value:
! U1 setvar "media.tof" "value"
Values
0
is the point of separation, such as the perforation or cut point
-84
to
64
for the MZ printer
-400
to
400
for all other Mobile printers
-400
is the lower limit for all other printers
For all other printers, the upper limit depends on the print mode (Thermal Transfer or Direct Thermal), the printer model, the print head density, and the current value of Label Top.
