1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.cid_type
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.cid_type

ip.dhcp.cid_type

This printer setting defines the type of client identifier (DHCP option 61) that will be sent if DHCP is enabled. A value of
"1"
 means the type of "Ethernet" and the printer’s MAC address will be used. A value of
"0"
 or
"2"
 means the client identifier sent will be
"ip.dhcp.cid_prefix"
 concatenated with
"ip.dhcp.cid_suffix"
.

Setvar

To instruct the printer to set the Client Identifier type:
! U1 setvar "ip.dhcp.cid_type" "value"
Values
  • "0"
     ASCII string
  • "1"
    MAC address of the wireless radio card
  • "2"
    HEX value
Default
"1"

Getvar

To instruct the printer to respond with the client identifier type:
! U1 getvar "ip.dhcp.cid_type"
Example
This
setvar
example shows the value set to
"1"
. 
! U1 setvar "ip.dhcp.cid_type" "1"
When the
setvar
 value is set to
"1"
, the
getvar
 result is
"1"
.