1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.ntp.enable 
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.ntp.enable 

ip.dhcp.ntp.enable 

This command controls whether or not the printer retrieves the address of a Network Time Protocol (NTP) server during DHCP address assignment.

Setvar

To set whether or not the printer retrieves the address of a Network Time Protocol (NTP) server during DHCP address assignment:
! U1 setvar "ip.dhcp.ntp.enable" "value"
Values
  • "off"
     does not request the NTP server address
  • "on"
     requests the NTP server address
Default
"off"

Getvar

To return the current setting value:
! U1 getvar "ip.dhcp.ntp.enable"