1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.dhcp.option12_format
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.dhcp.option12_format

wlan.ip.dhcp.option12_format

This command specifies the format of the option 12 value to be used in the discovery packet of the wireless print server.

Setvar

To set the format of option 12 value to be used in the discovery packet of the wireless print server:
! U1 setvar "wlan.ip.dhcp.option12_format" "value"
Values
String
Default
""

Getvar

To retrieve the format of option 12 value to be used in the discovery packet of the wireless print server:
! U1 getvar "wlan.ip.dhcp.option12_format"
Example
This
setvar
 example shows configuring the
wlan.ip.dhcp.option12_format
 to the value contained in the
device.friendly_name
.
It is necessary to surround the SGD entry to be used as source for the data with the < and > characters.
! U1 setvar "wlan.ip.dhcp.option12_format" "<device.friendly_name>"
To further explain, if the above command was issued and the value currently stored in the
device.friendly_name
 parameter was
"ShipPrinter"
, then the response to the following command would be
"ShipPrinter"
:
! U1 getvar "wlan.ip.dhcp.option12_value"