1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZBI Commands
  3. SETERR
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
SETERR

SETERR

This command sends a message to the printer to set the error flag. A logical interpreter flag is triggered in the printer. This error is referenced as a BASIC Forced Error.
Format
SETERR
Parameters
N/A
Example
An example of the
SETERR
 and
CLRERR
 commands.
AUTONUM
1,1
 
OPEN #1:NAME "ZPL" 
PRINT #1: "^XA^SXO,A,Y,Y^XZ" 
CLOSE #1 
FOR I=1 TO 10 
SLEEP 5 
IF MOD(I,2)=1 THEN 
SETERR 
ELSE 
CLRERR 
ENDIF 
NEXT I
Comments
This is a program command and must be preceded by a line number.