1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. power.sleep.cradle
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
power.sleep.cradle

power.sleep.cradle

This command enables or disables the sleep timeout feature while the printer is docked in the cradle. In the ZQ5 printer, the sleep timeout in the cradle is enabled by default. In the ZQ3 and ZQ6 printers, the sleep timeout in the cradle feature is disabled by default. This is done so as to manage the printer not having the Wake on BT, Wake on WLAN, and Wake feature on Ethernet support.
The command only affects the sleep timeout in cradle. If the user presses the power button, then the printer can still go to sleep, regardless of the setting.

Setvar

To set the command:
! U1 setvar "power.sleep.cradle" "values"
Values
  • "enabled"
     indicates that
    power.sleep.timeout
     is honored while the printer is docked in a cradle.
  • "disabled"
     indicates that
    power.sleep.timeout
     is disabled while the printer is docked in a cradle.
Default Value
"disabled"
 for ZQ3, ZQ6
"enabled"
for ZQ5

Getvar

To return the current setting: 
! U1 getvar "power.sleep.cradle"
Example
In the example below, the getvar returns the current setting of the sleep timeout in cradle feature.
! U1 getvar "power.sleep.cradle" "enabled"