1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. display.root_wml
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
display.root_wml

display.root_wml

This command specifies which control file is first processed by the front panel of the printer.

Setvar

To specify which control file is first processed by the printer’s front panel:
! U1 setvar "display.root_wml" "value"
Values
Any file name with a maximum of 128 characters in length.
Default
  • Z:INDEX420.WML
     for the QLn420 printers
  • Z:INDEX320.WML
     for the QLn220 and QLn320 printers
  • Z:INDEX.WML
     for all other printers
If the value is
""
 on power-up, then
Z:INDEX.WML
 is used.

Getvar

To retrieve the current setting value:
! U1 getvar "display.root_wml"