1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.country_code
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.country_code

wlan.country_code

This command defines the regulatory country for which the radio is currently configured.

Setvar

To set the country code for which the radio is to be configured:
! U1 setvar "wlan.country_code" "value"
The list of country codes is specific to each printer and depends on the printer model and its wireless radio configuration. The list is subject to change, addition, or deletion with any firmware update, at any time, without notice.
To determine the country codes available on your printer, issue the
! U1 getvar "wlan"
 command to return all commands related to WLAN settings. Locate the
wlan.country.code
  command in the results and view the country codes available for your printer.

Getvar

To retrieve the country code for which the radio is currently configured:
! U1 getvar "wlan.country_code"
Example
In this example, the
setvar
 sets the country code to USA/Canada. 
! U1 setvar "wlan.country_code" "usa/canada"