1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.dhcp.option12
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.dhcp.option12

wlan.ip.dhcp.option12

This command specifies if the DHCP option 12 (host name) is on or off in the discovery packet that is sent from the wireless print server.

Setvar

To enable or disable the DHCP option 12:
! U1 setvar "wlan.ip.dhcp.option12" "value"
Values
  • "on"
     turns on option 12
  • "off"
     turns off option 12
Default
"on"

Getvar

To return the current setting value:
! U1 getvar "wlan.ip.dhcp.option12"
Example
This
setvar
 example shows the value set to
"on"
.
! U1 setvar "wlan.ip.dhcp.option12" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.