1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.roam.max_chan_scan_time
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.roam.max_chan_scan_time

wlan.roam.max_chan_scan_time

This command sets how long the radio waits on a channel looking for probe responses.

Setvar

This command sets how long the radio waits on a channel looking for probe responses. The values are in milliseconds.
! U1 setvar "wlan.roam.max_chan_scan_time" "value"
Values
"10"
 to
"500"
Default
"100"

Getvar

This command retrieves the current setting for how long the radio waits on a channel looking for probe responses.
! U1 getvar "wlan.roam.max_chan_scan_time"
Example
This
setvar
 example shows the value set to
"100"
. 
! U1 setvar "wlan.roam.max_chan_scan_time" "100"
The
getvar
 result returns the current
setvar
 value. In this example, the
getvar
 result is
"100"
.