1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. capture.channel1.data.raw
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
capture.channel1.data.raw

capture.channel1.data.raw

This command retrieves the user data captured off of the port specified in
capture.channel1.port
.
Any binary zeros in the capture.data stream will be replaced with the escaped representation of NULL ("\000"). The delimiter data is not stored as part of the captured data.
This will be shown in the
HZA
 output within capture data section.

Getvar

To retrieve the user data captured off of the port specified in
capture.channel1.port
:
! U1 getvar "capture.channel1.data.raw"