1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.mirror.freq
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.mirror.freq

ip.mirror.freq

This command defines the frequency of mirroring updates (in minutes).

Setvar

To set the mirror frequency:
! U1 setvar "ip.mirror.freq" "value"
Values
"0"
 through
"65535"
 (minutes)
Default
"0"
 (disables this feature)
When the
"ip.mirror.freq"
 is set to a low value (other than zero) the printer will spend a lot of time performing the mirroring process.

Getvar

To retrieve the number of minutes to wait before performing another mirror update:
! U1 getvar "ip.mirror.freq"
Example
This
setvar
 example shows the value set to
"1000"
.
! U1 setvar "ip.mirror.freq" "1000"
When the
setvar
 value is set to
"1000"
, the
getvar
 result is
"1000"
 and mirroring will be attempted every 1000 minutes.