1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. odometer.media_marker_count1
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
odometer.media_marker_count1

odometer.media_marker_count1

This printer setting refers to the value of the first (count1) user resettable counter. The user resettable counters track how much media has passed through the printer in both inches or centimeters.

Setvar

To reset the first user resettable counter:
! U1 setvar "odometer.media_marker_count1" "value"
Values
"0"
 resets the counter
Default
Must be an accepted value or it is ignored.

Getvar

To return the current value of the first (count1) user resettable counter in both inches and centimeters:
! U1 getvar "odometer.media_marker_count1"
Example
This example shows how to get the first user resettable counter, how to reset it, and how to confirm the settings have changed:
To see the current settings, type:
! U1 getvar "odometer.media_marker_count1"
Something similar to this is shown: 
"8516 INCHES, 21632 CENTIMETERS"
To reset the these values to 0, type:
! U1 setvar "odometer.media_marker_count1" "0"
To confirm these settings were reset, type:
! U1 getvar "odometer.media_marker_count1"
If the resetting was successful, this is shown:
"0 INCHES, 0 CENTIMETERS"