1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. power.cycle_count
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
power.cycle_count

power.cycle_count

This command returns the number of charge cycles the battery has performed. A cycle is defined as a discharge of 80% of the pack's full charge capacity plus the concatenated partial charges that add to 80% of the pack's full charge capacity.

Getvar

To return the number of charge cycles: 
! U1 getvar "power.cycle_count"
Example
In the example below, the
getvar
 returns the number of charge cycles the battery has performed.
! U1 getvar "power.cycle_count" "77"