1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. comm.parity
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
comm.parity

comm.parity

This command sets the printer’s communication parity.
Once the printer’s communication port parameters have been changed, the host terminal must also be configured to match the new printer settings before the host can communicate again.

Setvar

To instruct the printer to set the communication port parity:
! U1 setvar "comm.parity" "value"
Values
  • "N"
     — None
  • "E"
     — Even
  • "O"
     — Odd

Getvar

To instruct the printer to respond with the currently set printer parity:
! U1 getvar "comm.parity"
Examples
In this example, the
getvar
 retrieves the currently set printer parity.
! U1 getvar "comm.parity"
This
setvar
 example sets the parity to None. 
! U1 setvar "comm.parity" "N"