1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. odometer.headclean
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
odometer.headclean

odometer.headclean

This printer setting refers to the head clean odometer count. This counter tracks how many inches and centimeters have passed through the printer since the head was last cleaned.

Setvar

To reset the head clean counter:
! U1 setvar "odometer.headclean" "value"
Values
"0"
resets the head clean counter
Default
Must be an accepted value or it is ignored

Getvar

To retrieve the values for the head clean counter:
! U1 getvar "odometer.headclean"
Example
This example shows how to get the odometer head clean, how to reset it, and how to confirm the settings changed.
To see the current settings, type:
! U1 getvar "odometer.headclean"
Something similar to this is shown: 
"1489 INCHES, 3784 CENTIMETERS"
To reset the these values to 0, type:
! U1 setvar "odometer.headclean" "0"
To confirm this settings were reset, type:
! U1 getvar "odometer.headclean"
If the resetting was successful, this is shown:
"0 INCHES, 0 CENTIMETERS"