1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.encryption_key
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.encryption_key

wlan.encryption_key

These parameters refer to the first, second, third, and fourth indexed WEP encryption keys. The WEP encryption keys are hexadecimal strings that are either 10 or 26 characters long depending on the encryption method (40-bit or 128 bit). The keys should match the wireless network WEP encryption keys.

Setvar

To set the encryption key value:
! U1 setvar "wlan.encryption_key[1|2|3|4]" "value"
Values
10 hexadecimal characters for 40-bit encryption and 26 hexadecimal characters for 128-bit encryption.
Default
All zeroes (10 or 26, depending on encryption setting)

Getvar

To instruct the printer respond with the encryption key value:
! U1 getvar "wlan.encryption_key1"
Example 1
In these examples, the
getvar
 results assume that the printer is using 40-bit encryption with the default settings. 
! U1 getvar "wlan.encryption_key1" 
! U1 getvar "wlan.encryption_key2" 
! U1 getvar "wlan.encryption_key3" 
! U1 getvar "wlan.encryption_key4"
Results for each key:
"0000000000"
Example 2
In these examples, the
setvar
 command instructs the printer to set the encryption key value. This example assumes that the printer is using 40-bit encryption.
! U1 setvar "wlan.encryption_key1" "A1B2C3D4F5"
! U1 setvar "wlan.encryption_key2" "G1H2J3K4L5"
! U1 setvar "wlan.encryption_key3" "M1N2P3Q4R5"
! U1 setvar "wlan.encryption_key4" "S1T2V3W4X5"