1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.dhcp.cid_enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.dhcp.cid_enable

external_wired.ip.dhcp.cid_enable

This command determines if DHCP (option 61) on the external wired print server is turned on or off.

Setvar

To instructs the printer to set the status of the client identifier of the external wired print server:
! U1 setvar "external_wired.ip.dhcp.cid_enable" "value"
Values
  • "off"
     client identifier is turned off
  • "on"
     client identifier is turned on
Default
"off"

Getvar

To instruct the printer to respond with the status of the client identifier of the external wired print server:
! U1 getvar "external_wired.ip.dhcp.cid_enable"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows the value set to
"off"
. 
! U1 setvar "external_wired.ip.dhcp.cid_enable" "off"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"off"
.