1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. Real Time Clock
  3. Real Time Clock Parameters
  4. RTC Date
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
RTC Date

RTC Date

Allows entry of the RTC date in the format selected by the
IDLE DISPLAY
 parameter.
The RTC parameters are password-protected. Refer to your printer’s user guide for specific instructions on accessing and modifying printer parameters.
Printer Model
Action
PAX Series print engines, Xi Series printers, and 105SL printers
Use the LEFT oval key to select the position to be adjusted
Then, use the RIGHT oval key to select the correct value for that position.
Z4Mplus and Z6Mplus printers
Press
SELECT
 to select the parameter.
Use the
MINUS
 (-) key to select the position to be adjusted
Then, use the
PLUS
 (+) key to select the correct value for that position.
Press
SELECT
 to accept any changes and deselect the parameter.
S4M printer
Press ENTER. The printer displays the current RTC date.
Modify the values as follows:
  • Press the right arrow to move to the next digit position.
  • To increase the value, press the up arrow.
  • To decrease the value, press the down arrow.
Press
ENTER
 to accept the value shown.
Invalid dates, such as 2/30/1999, may be entered, but they will not be saved.