1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.cid_value
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.cid_value

ip.dhcp.cid_value

This parameter defines the unique value to be used as the client identifier (option 61) if DHCP is enabled and
"ip.dhcp.cid_type"
 is
"1"
.
This parameter is only applicable if
ip.dhcp.cid_enable
 is set to
"on"
.

Setvar

To instruct the printer to change the CID value:
! U1 setvar "ip.dhcp.cid_value" "value"
Values
Any text string up to 20 characters in length.
Default
If
ip.dhcp.cid_type
 is set to:
  • "0"
     the default is the printer’s friendly name.
  • "1"
     the default is the MAC address of the printer.

Getvar

To instruct the printer to respond with the client identifier value:
! U1 getvar "ip.dhcp.cid_value"
Example
This
setvar
example changes the cid value to
"PRT001"
. 
! U1 setvar "ip.dhcp.cid_value" "PRT001"
The next time the printer sends a DHCP request, if
ip.dhcp.cid_type
 is
"0"
, the client identifier sent will be
ip.dhcp.cid_prefix
 plus
"PRT001".
For example, if
ip.dhcp.cid_prefix
 is
"ZEB"
, the actual client identifier sent will be
"ZEBPRT001"
.