1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZBI Commands
  3. CTRL-C
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
CTRL-C

CTRL-C

Sending an end-of-transmission character,
ETX
 (3 in hex), to the console (port 0) terminates the ZBI program currently running.
Format
N/A
Parameters
N/A
Example
N/A
Comments
In most terminal programs, you terminate the program using the
Ctrl-C
 key sequence. Another method is to store an ETX character in a file and have the terminal program send the file to the console port.
It is not recommended to use
RESTART
 after using a
CTRL-C
 because a command may have been prematurely interrupted. Restarting will have an undefined result.