1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD RFID Commands
  3. rfid.tag.calibrate
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
rfid.tag.calibrate

rfid.tag.calibrate

Use this command to initiate tag calibration for RFID media. During the process, the printer moves the media, calibrates the RFID tag position, and determines the optimal settings for the RFID media being used. Depending on the printer, these settings include the programming position, the antenna element to use, and the read/write power level to use.
For more information about RFID tag calibration, refer to the RFID Programming Guide for your printer. A copy is available online at www.zebra.com/manuals.

Setvar

To initiate tag calibration for RFID media:
! U1 setvar "rfid.tag.calibrate" "value"
Values
"restore"
"run"

Example

This
setvar
 example restores the programming position back to the printer’s default value. 
! U1 setvar "rfid.tag.calibrate" "restore"
This
setvar
 example performs RFID tag calibration. 
! U1 setvar "rfid.tag.calibrate" "run"