1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. device.set_clock_to_build_date
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
device.set_clock_to_build_date

device.set_clock_to_build_date

Enables or disables a lower bound of the firmware build date for the rtc.date SGD.
If enabled, when the printer powers up and it finds and RTC date earlier than the firmware build date, it will set the RTC date to the firmware build date.

Setvar

To enable or disable a lower bound of the firmware build date for the rtc.date SGD:
! U1 setvar "device.set_clock_to_build_date" "value"
Values
  • "enabled"
  • "disabled"
Default
"enabled"

Getvar

To retrieve the firmware build date for the
rtc.date
 SGD:
! U1 getvar "device.set_clock_to_build_date"