1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.dhcp.request_timeout
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.dhcp.request_timeout

wlan.ip.dhcp.request_timeout

This command sets the maximum time (in seconds) to wait for a response to a DHCP discovery request on the wireless print server.

Setvar

To set the maximum time (in seconds) to wait for a response to a DHCP discovery request on the wireless print server:
! U1 setvar "wlan.ip.dhcp.request_timeout" "value"
Values
"2"
 through
"30"
Default
"2"

Getvar

To retrieve the maximum time (in seconds) to wait for a response to a DHCP discovery request on the wireless print server:
! U1 getvar "wlan.ip.dhcp.request_timeout"
Example
This
setvar
 example shows the value set to
"2"
. 
! U1 setvar "wlan.ip.dhcp.request_timeout" "2"
When the
setvar
 value is set to
"2"
, the
getvar
 result is
"2"
.