1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.dhcp.cid_enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.dhcp.cid_enable

wlan.ip.dhcp.cid_enable

This command determines if DHCP (option 61) is turned on or off of the wireless print server.

Setvar

To instruct the printer to set the status of the client identifier of the wireless print server:
! U1 setvar "wlan.ip.dhcp.cid_enable" "value"
Values
  • "off"
     means the client identifier is turned off
  • "on"
     means the client identifier is turned on
Default
"off"

Getvar

To instruct the printer to respond with the status of the client identifier of the wireless print server:
! U1 getvar "wlan.ip.dhcp.cid_enable"
Example
This
setvar
 example shows the value set to
"off"
. 
! U1 setvar "wlan.ip.dhcp.cid_enable" "off"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"off"
.