1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.dhcp.cid_all
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.dhcp.cid_all

external_wired.ip.dhcp.cid_all

This printer setting defines the entire client identifier (DHCP option 61) if DHCP is enabled on the external print server and
"external_wired.ip.dhcp.cid_type"
 is set to
"0"
, or
"2"
. The MAC address is used if the type is set to
"1"
.

Setvar

To instruct the printer to change the client identifier prefix and suffix of the external wired print server:
! U1 setvar "external_wired.ip.dhcp.cid_all" "value"
Values
A maximum length of 60 characters if the CID type is ASCII, or 120 characters if the CID type is hexadecimal.
Default
""

Getvar

To instruct the printer to respond with the client identifier prefix and suffix of the external wired print server:
! U1 getvar "external_wired.ip.dhcp.cid_all"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows the value set to
"printer"
. 
! U1 setvar "external_wired.ip.dhcp.cid_all" "printer"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"printer"
.