1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Commands
  3. ~TA
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
~TA

~TA

The
~TA
 command lets you adjust the rest position of the media after a label is printed, which changes the position at which the label is torn or cut.

Tear-off Adjust Position

Format:
~TA###
These are some important facts about this command:
  • For 600 dpi printers, the step size doubles.
  • If the number of characters is
    less than
     3, the command is ignored.
Parameters
Details
### =
 change in media rest position (3-digit value in dot rows must be used.)
Values:
–120
 to
120
0
 to
120
 (on the HC100)
Default:
 last permanent value saved
Comments:
 If the parameter is missing or invalid, the command is ignored.