1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. media.present.present_timeout
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
media.present.present_timeout

media.present.present_timeout

This printer setting determines how long the printer will wait after a present event to clear the label. See ^KV ZPL command.

Setvar

This command instructs the printer to change the presenter function mode.
! U1 setvar "media.present.present_timeout" "value"
Values
"0"
 to
"300"
If label is not taken, retract label when timeout expires. Timeout is in seconds. Zero (0) indicates that there is no timeout. The label will stay presented until removed manually or a new label is printed.

Getvar

This command instructs the printer to respond with the currently set presenter function mode.
! U1 getvar "media.present.present_timeout"